High precision digital inductance capacitance table LC100-a LC100A LC100-s inductance capacitance meter

Product Description:

LC100-A type is a full-featured added 1uF-100mF electrolytic capacitor test function, in addition to the basic three stalls, all the stalls are autoranging.

This product has an absolute advantage in the small value of testing with respect to the sales of finished products on the market inductance capacitance meter (such as 6243 series) is the accuracy and minimum resolution, and flexible online calibration can always maintain measurement accuracy. The instrument does not use any potentiometer adjustment, calibration parameters are completely stored in the microcontroller FLASH internal power-down is not lost, than the potentiometer calibration methods to accurately.

LC100-A basic technical indicators:

• Measurement accuracy: 1%
• Capacitance measuring range: 0.01pF-10uF
• Minimum resolution: 0.01pF
• Inductance Range: 0.001uH-100mH
• Minimum resolution: 0.001uH
• Large inductance measurement range: 0.001mH-100H
• Minimum resolution: 0.001mH
• Large capacitance measuring range: 1uF-100mF
• Minimum resolution: 0.01uF
• Test frequency: capacitors, inductors file about 500kHz, large inductance of about 500Hz
• Can display current test frequency value
• Effective display digits: 4
• Display: 1602 LCD
• Power supply: miniUSB interface to take power or 5V power supply
• SMD soldering components, stable and reliable! 

Manual

0.36inch Red LED Mini Digital Voltmeter DC 0V To 99.9V Red

Features:

• LED display, clear and easy viewing.
• Low power consumption.
• Wide measurement range 0-99.9V.
• Snap on design for easy installation.

Specifications:

• Measurement range: 0-99.9V
• LED color: Red
• Refresh speed: about 500ms/each time.
• Power supply: DC 4.5v – 28V
• Working temperature: -10 – 65 
• Product weight: 18g / 0.63oz
• Product size: 3.4 * 2.9 * 2.2cm / 1.9 * 1.2 * 0.9in
• Package weight: 18g / 0.63oz
• Package size: 4.8 * 2.9 * 2.2cm / 1.9 * 1.2 * 0.9in
• Package List: 1 * Mini Digital Voltmeter

0.28inch DC 2.5-30V Voltmeter Red 2 wired

0.28inch DC 2.5-30V Voltmeter Green 2 wired

0.28inch DC 2.5-30V Voltmeter Blue 2 wired

Hall Current Sensor Module ACS712 5A model

Product Specification

The current sensor chips: ACS712ELC-05B.
Pin 5V power supply, on-board power indicator.
The module can measure the positive and negative 5 amps, corresponding to the analog output 185mV / A.
Built in a potentiometer for sensitivity control. Convenient and easy to install.

Package Content :

5A Current Sensor Module

Features

• Product Name : Current Sensor Module;Model : ACS712
• Range Current : 5A;Size : 31 x 12mm/ 1.2″ x 0.47″ (L*W)
• Material : Electric Part, Plastic
• Net Weight : 4g
• Package Content : 1 x Current Sensor Module

Additional Information

• Manufacturer: SenMod
• Shipping Weight: 5
 

Product Dimensions:

• Width: 2.70
• Length: 3.70
• Height: 0.50

MB102 Breadboard Power Supply Module 3.3V/5V For Raspberry Pi Arduino

Description:

• Ranking MB102 Breadboard 3.3V/5V Power Supply Module For Arduino Board
• Brand new high quality Breadboard power supply module
• Apply to MB102 breadboard Input voltage
• 6.5-12 V (DC) or USB power supply Output voltage
• switch over Maximum output current

Please notice: this item only a Power Supply Module, Breadboard is not included

Package content: 1 x MB102 Breadboard Power Module.

Standard Voltage detection module Voltage Sensor Module

Features:

100% brand new and high quality
Size: 25mm×13mm/0.98″×0.51″(approx)
This module is based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller.Arduino analog input voltages up to 5 v,
the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V).
Arduino AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage detection module is 0.00489Vx5=0.02445V.

Voltage input range : DC0-25 V
Voltage detection range : DC0.02445 V-25 V
Voltage analog resolution : 0.00489 V
Output Interface : “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins
DC input interface : red terminal positive with VCC, negative with GND
By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery, can also use the IICLCD1602 LCD to display voltage.

 This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps, it is great for building your own energy monitor or for building an over-current protection device for an AC load.

 This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps, it is great for building your own energy monitor or for building an over-current protection device for an AC load.