Home Assistant Connect ZWA-2

Product Weight: 0.0100KG

The ultimate way to connect
Z-Wave devices to Home Assistant.

Αναβαθμίστε το δίκτυο Z-Wave σας με ισχύ, εμβέλεια και απλότητα — απόλυτα ενσωματωμένο με Home Assistant.

Specifications

SoCs : Silicon Labs ZG23 ESP32-S3 (USB-serial bridge)

Power/data : USB-C, 5 V DC, 1 A

Supported protocols : Z-Wave, Z-Wave Long Range

Z-Wave series : 800

Antenna characteristics

Frequency range: 860-930 MHz

The frequency used by end devices depends on the region, e.g:

US: 908.42/916MHz (mesh), 912/920MHz (LR)
EU: 868.4/869.85 MHz (mesh), 864.0/866.0 MHz (LR)
AU: 919.8/921.4 MHz

Peak gain:
3.38 dBi

Radiation pattern:
Omnidirectional

Environmental conditions for operation

Indoor use only

0 °C to 65 °C | 32 °F to 149 °F

Humidity: non-condensing

Keep in dry, not excessively dusty environment as this can cause damage to the unit

Do not leave the unit in direct sunlight or near any heat source, as this can cause overheating.

In the box

Antenna + Base

1.5m USB-Cable (USB 2.0/3.0)

Quickstart guide

Warranty and Safety Information

Dimensions and weight

Device

125x125x315 mm

350 g

With box

345x222x45 mm

600 g

Enclosure

Polycarbonate plastic

Colors

White and semi-transparent