Product Weight: 0.3000KG
2048 individual RGB LEDs, 3mm pitch
supports Raspberry Pi Pico, ESP32, Arduino…
Maybe be on the wall of tall buildings, maybe on corners of unknown streets, you can always see the dazzling neon light, everywhere in the noisy yet energetic city. Sometimes, looking at these shining screens, you may want to make a unique one, and give it to the beautiful night as a gift. Now, this 64×32 RGB LED matrix panel will be the start to make your wish come true.
| Dimensions | 192mm × 96mm |
|---|---|
| Pixels | 64×32=2048 DOTS |
| Pitch | 3mm |
| Pixel form | 1R1G1B |
| Viewing angle | ≥160° |
| Control type | synchronization |
| Driving | 1/16 scan |
| Header | HUB75 |
| Power supply | 5V / 2.5A (VH4 header input) |
| Power | ≤12W |
| Pin | Description | Pin | Description |
|---|---|---|---|
| VCC | 5V power input | GND | Ground |
| R1 | R higher bit data | R2 | R lower bit data |
| G1 | G higher bit data | G2 | G lower bit data |
| B1 | B higher bit data | B2 | B lower bit data |
| A | A line selection | B | B line selection |
| C | C line selection | D | D line selection |
| E | E line selection | CLK | clock input |
| LAT/STB | latch pin | OE | output enable |
multi LED matrix panel can be chained together to build a larger panel
via HUB75 input/output header
DIY maker desktop or wall mount display, signboard, environment monitor…
Recommended deals for you.
