Arduino Ethernet Rev3 WITH PoE
The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.
It includes power-over-Ethernet (PoE) module to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
| |
- Microcontroller : ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 14
- PWM Digital I/O Pins : 4
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 32 KB
- Flash Memory for Bootloader : 0.5 KB
- SRAM : 2 KB
- EEPROM : 1 KB
- Clock Speed : 16 MHz
- Lenght : 68.6 mm
- Width : 53.3 mm
|